The Telegram Expert interface allows convenient proxy management — uploading, checking, or removing them from the general list. The user can manually control the status of each entry: all information is presented in table format with quick evaluation and action options.
Table columns:
1. host – displays the IP address or domain name of the server to which the program connects via proxy.
2. port – shows the numerical port number used to access the internet through the given proxy.
3. login – contains the login required to authorize through the proxy server.
4. password – displays the password needed to access the specific proxy.
5. type – shows the type of connection used: HTTP or SOCKS5.
6. version – reflects the IP version used by the proxy (only IPv4 is supported).
7. response – indicates how quickly the server responds to a request (response time in milliseconds).
8. status – visually shows whether the proxy passed the check: «ok» means the connection is established, «bad» means the connection failed.
9. actions – in this column, you can manually launch a check for a specific proxy or delete it from the list.
The software works only with IPv4 proxies.
The user can select one or multiple rows from the table and resend the proxies for verification or delete them. This is especially convenient for cleaning up non-working proxies after the initial check.
If you are sure the proxies should be working, but you received a «bad» status during the check, test them in practice — for example, by trying to log into an account. Sometimes the system may incorrectly mark the connection as unavailable, especially if there are network delays.
Also, if you notice unstable connection speeds in your region, it’s recommended to increase the response timeout to 45 seconds and set the connection attempt limit to 15 in the software settings. This may help reveal that previously «red» proxies actually work normally. Reliable proxies always pass testing stably.
New addresses are added below. You need to select the required connection type, and then enter the data in the format: ip
ort:loginassword. After that, click the add button — the system will check the entered values and, if no errors are found, will add them to the table.
Proxy usage setup:
– If you select «Take proxy from settings» in the «Work through proxy» section, the software will randomly use the proxies from the general list described above.
– If you select «Take proxy from account», the proxy will be linked to a specific account. Go to the account panel, select the necessary profiles, click «Select action,» then «Add proxy,» and enter the data in the standard format.
– If the setting is «Disabled», the software will use your provider’s IP address during operation.
Table columns:
1. host – displays the IP address or domain name of the server to which the program connects via proxy.
2. port – shows the numerical port number used to access the internet through the given proxy.
3. login – contains the login required to authorize through the proxy server.
4. password – displays the password needed to access the specific proxy.
5. type – shows the type of connection used: HTTP or SOCKS5.
6. version – reflects the IP version used by the proxy (only IPv4 is supported).
7. response – indicates how quickly the server responds to a request (response time in milliseconds).
8. status – visually shows whether the proxy passed the check: «ok» means the connection is established, «bad» means the connection failed.
9. actions – in this column, you can manually launch a check for a specific proxy or delete it from the list.
The software works only with IPv4 proxies.
The user can select one or multiple rows from the table and resend the proxies for verification or delete them. This is especially convenient for cleaning up non-working proxies after the initial check.
If you are sure the proxies should be working, but you received a «bad» status during the check, test them in practice — for example, by trying to log into an account. Sometimes the system may incorrectly mark the connection as unavailable, especially if there are network delays.
Also, if you notice unstable connection speeds in your region, it’s recommended to increase the response timeout to 45 seconds and set the connection attempt limit to 15 in the software settings. This may help reveal that previously «red» proxies actually work normally. Reliable proxies always pass testing stably.
New addresses are added below. You need to select the required connection type, and then enter the data in the format: ip
ort:loginassword. After that, click the add button — the system will check the entered values and, if no errors are found, will add them to the table.Proxy usage setup:
– If you select «Take proxy from settings» in the «Work through proxy» section, the software will randomly use the proxies from the general list described above.
– If you select «Take proxy from account», the proxy will be linked to a specific account. Go to the account panel, select the necessary profiles, click «Select action,» then «Add proxy,» and enter the data in the standard format.
– If the setting is «Disabled», the software will use your provider’s IP address during operation.
Последнее редактирование: